Mercedes-Benz GLK-Class: Stowing a used collapsible spare wheel
Take the following steps to stow a used collapsible spare wheel. It will otherwise not fit in the spare wheel well. Mercedes-Benz recommends that you have this work carried out at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.
Only place the collapsible spare wheel in the vehicle when it is dry. Otherwise, moisture may get into the vehicle.
- Remove the valve extractor from the vehicle tool kit.
- Unscrew the valve cap from the valve.
- Unscrew the valve insert from the valve and release the air.
Fully deflating the tire can take a few minutes.
- Screw the valve insert back into the valve.
- Screw the valve cap back on.
- Place the valve extractor back into the vehicle tool kit.
- Stow the collapsible spare wheel in the emergency spare wheel well under the cargo compartment and fasten in place.
Removing the collapsible spare wheel
The collapsible spare wheel can be found in the stowage well under the trunk floor. Lift the trunk floor up (). Remove stowage well 1. Turn retaining screw 2 counter-clockwise and remo ...Flat tire
...See also:
Troubleshooting Tips
If you are having trouble programming HomeLink , here
are some of the most common solutions:
• Replace the battery in the original hand-held transmitter.
• Press the LEARN button on the Garage ...
Rear windows side seating position
Rear windows side seating position
1) Head restraint
2) Release button
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into ...
Top tether anchorages
Your vehicle is equipped with three top
tether anchorages so that a child restraint
system having a top tether can be
installed in the rear seat. When installing
a child restraint system using ...