Subaru Forester: Setting Bluetooth® audio - Bluetooth® audio (type C and D audio) - Audio - Subaru Forester Owner's ManualSubaru Forester: Setting Bluetooth® audio

1. Select “BT-A SETUP” by pressing the “MENU” button (type C audio)/Select “BT Audio Setup” by operating the “TUNE/ TRACK/CH” dial (type D audio).

2. Perform the following procedure by operating the “TUNE/TRACK/CH” dial while “BT-A” (type C audio)/“BT Audio” (type D audio) is displayed.

NOTE
You cannot set a Bluetooth® audio while driving.

Media format
Bluetooth audio devices cannot be connected if they are not compatible with the following Bluetooth® profiles. - A2DP (Advanced Audio Distribution Profile) - AVRCP (Audio/Video Remote Contro ...

Registering (pairing) device
1. Select the “PAIR AUDIO” (type C audio)/“Pair Audio Player” (type D audio) menu. If a device is already registered, “MEMORY FULL” is displayed and the mode changes to the Bluetoo ...

See also:

Bag hooks
The bag hook can bear a maximum load of 11 lbs (5 kg). Do not use it to secure a load. There is one bag hook on the left side wall in the cargo compartment and there are two hooks on the right ...

Using the system
The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou ...

Electrical system
General information 12 volt system with a voltage-regulated alternator. Single pole system in which the chassis and engine block are used as conductors. The negative terminal is connected to the ...