Volvo XC60: Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the retaining clamps by pressing them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order.
Reinserting the headlight housing
When reinserting the housing, be sure that the long locking pin (to the left in the illustration) is securely in place in both of its retaining clamps. 1. Plug in the connector until it clicks ...Low beam, Halogen
1. Remove the headlight housing from the vehicle (see page 322). 2. Remove the cover over the bulbs (see page 323). 3. Unplug the connector from the bulb. 4. Remove the bulb by pressing the h ...See also:
In case of an emergency
Road warning In case of an emergency while driving Overheating Emergency starting
Electrical circuit protection Towing If you have a flat tire ...
Headlight aiming control (if so equipped)
Headlight aiming control (if so equipped)
Depending on the number of occupants in the
vehicle and the load it is carrying, the headlight
axis may be higher than desired. If the vehicle is
tra ...
Sunroof Maintenance
Use only a non-abrasive cleaner and a soft cloth to clean
the glass panel. ...