Mercedes-Benz GLK-Class: Overview of occupant safety
important facts about the restraint system components of the vehicle.
The restraint system consists of:
- seat belts
- child restraint systems
- LATCH-type (ISOFIX) child seat anchors
Additional protection is provided by:
- SRS (Supplemental Restraint System)
- NECK-PRO head restraints
- Air bag system components with:
- PASSENGER AIR BAG OFF indicator lamp
- front-passenger seat with Occupant
Classification System (OCS) The different air bag systems work independently of each other. The protective functions of the system work in conjunction with each other. Not all air bags are deployed in an accident.
WARNING
Modifications to or work improperly conducted on restraint system components or their wiring, as well as tampering with interconnected electronic systems, can lead to the restraint systems no longer functioning as intended.
Air bags or Emergency Tensioning Devices (ETDs), for example, could deploy inadvertently or fail to deploy in accidents although the deceleration threshold for air bag deployment is exceeded. Therefore, never modify the restraint systems. Do not tamper with electronic components or their software.
See "Children in the vehicle" () for more information on infants and children traveling with you in the vehicle and restraints for infants and children.
Occupant safety
...See also:
Headlamps With Wipers (Available with Auto Headlights Only)
When on is selected, and the headlight switch is in the
AUTO position, the headlights will turn on approximately
10 seconds after the wipers are turned on. If the
headlights were turned on by th ...
Wheels and Trim—Aluminum or Chrome
Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing
thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.
Keep the wheels clean using ...
Installing the ball holder
1. If necessary, remove the cotter pin from
the locking bolt and slide the locking bolt
out of the hitch assembly.
2. Slide the ball holder into the hitch assembly.
3. Align the hole in the ball ...