Hyundai Tucson: Hazard warning system
The hazard warning system should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as possible. The hazard warning lights are turned on by pushing in the hazard switch. This causes all turn signal lights to blink. The hazard warning lights will operate even though the key is not in the ignition. To turn the hazard warning lights off, push the switch a second time.
Front fog light switch
(If installed)
To turn on the front fog lights, push the switch.
They will light when the headlight switch is in the
second position and the ignition key is in the
"ON" position.
N ...
Window defroster switch
Windshield wiper Blade De-icer
(If installed)
The windshield wiper blade de-icer is turned on
by pushing in the switch. To turn the de-icer off,
push the switch a second time. The windshield ...
See also:
Dinghy Towing
Front-wheel&-drive and all-wheel-drive vehicles may be dinghy towed from the
front. These vehicles can also be towed by placing them on a platform trailer with
all four wheels off of the groun ...
Overheating
If your temperature gauge indicates overheating, if you experience a loss of
power, or if you hear a loud knocking or pinging noise, the engine has probably
overheated. Should any of these symptom ...
Lift gate release
Lift gate release
If the lift gate cannot be opened due to a
discharged battery, follow these steps.
1. Remove the cover inside of the lift gate with
a suitable tool.
2. Move the lever toward ...
