Hyundai Tucson: Tire chains
Tire chains, if necessary, should be installed on the front wheels. Be sure that the chains are installed in accordance with the manufacturer's instructions. To minimize tire and chain wear, do not continue to use tire chains when they are no longer needed.
WARNING: o When driving on roads covered with snow or ice, drive at less than 20 mph. o Use the SAE "S" class or wire & plastic chains. o Don't use a tire chains on a vehicle equipped with aluminium wheels. If it is unavoidable use wire-type chains. o Use wire chains less than 15mm to prevent damage to the chain's connection. o If you have noise caused by chains contacting the body, retighten the chain to avoid contact with the vehicle body. o To prevent body damage, retighten the chains after driving 0.3~0.6 miles.
Snow tires
If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor ha ...Tire rotation
Tires should be rotated every 7,500 miles (12,000 km). If you notice that tires are wearing unevenly between rotations, have the car checked by a Hyundai dealer so the cause may be correct ...See also:
Fuel Filler Cap
The fuel filler cap is located on the right rear side of the vehicle. The fuel
filler door can be unlocked by pulling up on the opener lever located on the outboard
side of the driver’s seat ...
Hill start assist system (MT models)
The Hill start assist system is a
device only for helping the driver
to START the vehicle on an uphill
grade. To prevent accidents when
the vehicle is parked on a slope, be
sure to firml ...
Vehicle event data (Black box)
Your vehicle's driving and safety systems
employ computers that monitor, and share
with each other, information about your vehicle's
operation. One or more of these computers
may store what th ...