Jeep Liberty: Engine Block Heater — If Equipped
The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded three-wire extension cord.
The engine block heater cord is found under the hood clipped to the heater line on the left side of the engine.
The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine.
WARNING!
Remember to disconnect the engine block heater
cord before driving. Damage to the 110-115 Volt AC
electrical cord could cause electrocution.
After Starting
The idle speed will automatically decrease as the engine
warms up. ...
Automatic Transmission
CAUTION!
Damage to the transmission may occur if the following
precautions are not observed:
• Shift into PARK only after the vehicle has come to
a complete stop.
• Shift into or out of RE ...
See also:
External audio source volume
If an external devices such as an MP3 player or
an iPod is connected to the AUX socket, the
device's volume may be different from the volume
of the internal sound sources such as the
disc play ...
Terrain response operation
Terrain Response selection is via one of two
centre console switches. Depending on vehicle
specification, the control switches may include
a Dynamic program setting. Use the switches
to move throu ...
Power Liftgate
On vehicles with a power liftgate, the vehicle must be in P (Park) to operate.
The taillamps flash when the power liftgate moves.
WARNING
You or others could be injured if caught in the path of th ...
