Jeep Liberty: Draining Fluid - Transfer Case - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Draining Fluid

First remove the fill plug (1), then the drain plug (2).

Recommended tightening torque for the drain and fill plugs is 15–25 ft lbs (20–34 N·m).

CAUTION!
Do not over-tighten the plugs. You could damage them and cause a leak.

    Adding Fluid
    Fluid should be added only to fill hole until fluid begins to run out of the hole. ...

    Lubricant Selection
    Use only manufacturer’s recommended fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. ...

    See also:

    Accessing navigation
    From the Home menu touch the On road nav soft key. Alternatively press the NAV hard key on the facia. A caution screen will be displayed. If the navigation screen language has not been set, now is ...

    Parking
    Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline. Set the parking brake before you pu ...

    Seat belt
    Display messages Possible causes/consequences and Solutions After starting the engine, the red seat belt warning lamp lights up for six seconds. The seat belt warning lam ...