Jeep Liberty: Windshield Wiper Blades - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: Windshield Wiper Blades

Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations of salt or road film.

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield.

Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc.

NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary.

    Body Lubrication
    Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically wi ...

    Adding Washer Fluid
    The windshield and rear window washers share the same fluid reservoir. The fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level in the reservoir at ...

    See also:

    Infants or small children
    Use a child restraint system that is suitable for your vehicle. Refer to “Child restraint systems”. ...

    Main DVD Video menu
    Disc menu DVD disc menu Play/Pause/Continue Stop Subtitles Audio tracks Advanced settings     Angle     DivX® VOD code Audio settings ...

    Canceling a Remote Start
    To cancel a remote start, do one of the following: ○ Press until the parking lamps turn off. ○ Turn on the hazard warning flashers. ○ Insert the key and turn it to ON/ RUN and ...