GMC Terrain: Storing and Deleting Phone Numbers
The system can store up to 30 phone numbers as name tags in the Hands&-Free Directory that is shared between the Bluetooth and OnStar systems.
The following commands are used to delete and store phone numbers. Store: This command will store a phone number, or a group of numbers as a name tag.
Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time.
Delete: This command is used to delete individual name tags.
Delete All Name Tags: This command deletes all stored name tags in the Hands&-Free Calling Directory and the Destinations Directory.
Using the “Store” Command
1. Press . The system responds “Ready,”
followed by a tone.
2. Say “Store.”
3. Say the phone number or group of numbers you want to store all at once with no
pauses, then follow the directions given by the system to save a name tag for this
number.
Using the “Digit Store” Command
If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.
To hear all of the numbers recognized by the system, say “Verify” at any time.
1. Press b / g. The system responds “Ready,” followed by a tone.
2. Say “Digit Store.”
3. Say each digit, one at a time, that you want to store. After each digit is entered,
the system repeats back the digit it heard followed by a tone. After the last digit
has been entered, say “Store,” and then follow the directions given by the system
to save a name tag for this number.
Using the “Delete” Command
1. Press . The system responds “Ready,”
followed by a tone.
2. Say “Delete.”
3. Say the name tag you want to delete.
Using the “Delete All Name Tags” Command
This command deletes all stored name tags in the Hands&-Free Calling Directory and the Destinations Directory.
To delete all name tags:
1. Press b / g. The system responds “Ready,” followed by a tone.
2. Say “Delete all name tags.”
Listing Stored Numbers
The list command will list all stored numbers and name tags.
Using the “List” Command
1. Press . The system responds “Ready,”
followed by a tone.
2. Say “Directory.”
3. Say “Hands&-Free Calling.”
4. Say “List.”
Pairing
A Bluetooth&-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth ...Making a Call
Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial: This command allows a ph ...See also:
SRS airbag instructions for Canadian owners (in French)
The following is a French explanation of SRS airbag instructions
extracted from the SRS airbag section in this manual.
See the SRS airbag section for more detailed SRS airbag instructions
in Englis ...
Opening the hood
WARNING
Do not pull the release lever while the vehicle is in motion. Otherwise, the
hood could be forced open by passing air flow. This could cause the hood to come
loose and injure you and ...
Example on your vehicle
1 Cargo capacity
2 Total load capacity
When 2 people with the combined weight of 366 lb. (166 kg) are
riding in your vehicle, the available amount of cargo and luggage load
capacity will be as f ...