GMC Terrain: Driving with the Blind Spot Mirror
Actual Mirror View
1. When the approaching vehicle is a long distance away, the image in the main mirror is small and near the inboard edge of the mirror.
2. As the vehicle gets closer, the image in the main mirror gets larger and moves outboard.
3. As the vehicle enters the blind zone, the image transitions from the main mirror to the blind spot mirror.
4. When the vehicle is in the blind zone, the image only appears in the blind spot mirror.
Blind Spot Mirrors
The blind spot mirror is a small convex mirror built into the upper and outer
corner of both outside mirrors. It can show objects that may be in the vehicle's
blind zone. ...
Using the Outside Mirror with the Blind Spot Mirror
1. Set the main mirror so that the side of the vehicle can just be seen and the
blind spot mirror has an unobstructed view.
2. When checking for traffic or before changing a lane, look at the main ...
See also:
MT models
1. Apply the parking brake.
2. Turn off unnecessary lights and accessories.
3. Press the clutch pedal to the floor and
shift the shift lever into neutral. Hold the
clutch pedal to the floor whil ...
Resume set speed
If cruise control has been deactivated temporarily,
it can be reactivated by pressing .
The
vehicle's speed returns to the most recently set
speed.
WARNING
There may be a significant increas ...
Dome Lamps
There are front and rear dome lamps.
The dome lamp controls are located in the overhead console. To change the settings,
press the following:
(Dome Lamp Override): Turns the
lamps off, even whe ...
