GMC Terrain: Obstacle Detection Features
If the liftgate encounters an obstacle during a power open or close cycle, a warning chime will sound and the liftgate will automatically reverse direction to the full closed or open position. After removing the obstruction, the power liftgate operation can be used again. If the liftgate encounters multiple obstacles on the same power cycle, the power function will deactivate and a message will display in the Driver Information Center (DIC) , see Object Detection System Messages on page 5‑29. After removing the obstructions, the liftgate will resume normal power operation.
Pinch sensors are located on the side edges of the liftgate. If an object is caught between the liftgate and the vehicle and presses against this sensor, the liftgate will reverse direction and open fully. The liftgate will remain open until it is activated again or closed manually.
Power Liftgate
On vehicles with a power liftgate, the vehicle must be in P (Park) to operate. The taillamps flash when the power liftgate moves. WARNING You or others could be injured if caught in the path of th ...Power Liftgate 3/4 Mode
To program the liftgate opening height: 1. Turn the liftgate switch to either the MAX , or the 3/4 mode position and power open the liftgate. 2. Stop the liftgate movement at the desired height by ...See also:
Front airbags
Front airbags ...
Compact Disc (CD) player operation
Place the ignition switch in the ACC or ON
position and insert the Compact Disc (CD) into
the slot with the label side facing up. The CD will
be guided automatically into the slot and start
pl ...
Rear seat head restraints
Adjust the head restraint so
that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the ...