GMC Terrain: Parking Brake - Brakes - Driving and Operating - GMC Terrain Owner's ManualGMC Terrain: Parking Brake

To set the parking brake, hold the regular brake pedal down, then push the parking

To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down.

If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 5‑16.

Notice: Driving with the parking brake on can overheat the brake system and cause premature wear or damage to brake system parts. Make sure that the parking brake is fully released and the brake warning light is off before driving.

To release the parking brake, hold the regular brake pedal down, then push down momentarily on the parking brake pedal until you feel the pedal release. Slowly pull your foot up off the park brake pedal. If the parking brake is not released when you begin to drive, the brake system warning light will be on and a chime will sound warning you that the parking brake is still on.

If you are towing a trailer and are parking on a hill, see Driving Characteristics and Towing Tips on page 9‑57.

    Braking in Emergencies
    ABS allows the driver to steer and brake at the same time. In many emergencies, steering can help more than even the very best braking. ...

    Brake Assist
    This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brak ...

    See also:

    Passenger compartment
    Passenger compartment 1. Cargo cover* 2. Coat hooks 3. Ceiling light 4. Door armrest — Power window switch — Power door lock switch 5. Sun visors 6. Moonroof* 7. Front map light ...

    Seek in PTY (Program type) group (type A, B and C audio)
    Type A and B audio: Type C audio: In the PTY selection mode, when the preferred PTY group has been selected, pressing the “SEEK” button “” or “” seeks within that PTY group. T ...

    Connecting the jumper cables
    Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharge ...