GMC Terrain: Auxiliary Taillamp
To replace one of these lamps:
1. Open the liftgate. See Liftgate on page 2‑9.
2. Remove the interior trim access panel.
A. Attachment Nuts
B. Retaining Hook
3. Remove the five attachment nuts (A) securing the taillamp assembly to the
liftgate.
4. Disengage the retaining hook (B) and pull the taillamp assembly out of the vehicle
liftgate.
5. Disconnect the lamp wiring harness.
6. Turn the bulb socket counterclockwise and pull it out.
7. Pull the bulb straight out of the socket.
8. Install the new bulb.
9. Push the bulb socket in and turn it clockwise.
10. Reverse Steps 2 through 5 to reinstall lamp assembly.
Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...Back–Up Lamp
Removal of the lamp assembly is not required to replace the back-up lamp bulb. To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the interior trim acces ...See also:
Main FM1/FM2 menu
FM menu
Show radio text
Show presets
Scan
Advanced settings
Reset all FM settings
Audio settings ...
Media center 130 (RES) — AM/FM stereo radio with CD PLAYER (MP3 AUX jack)
NOTE: The radio sales code is located on the lower right
side of the radio faceplate.
Media Center 130 (RES)
Operating Instructions — Radio Mode
NOTE: The ignition switch must be in the ON o ...
Blower Control
For full automatic operation or for
automatic blower operation, turn the
knob to the AUTO position. In manual
mode there are six blower speeds that
can be individual selected. In off positio ...