Subaru Forester: High beam indicator light
This light shows that the headlights are in the high beam mode.
This indicator light also illuminates when the headlight flasher is operated.
Turn signal indicator lights
These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as ...Cruise control indicator light
This light illuminates when the “CRUISE” main switch is pressed. If you press the main switch button while turning the ignition switch “ON”, the cruise control function is deactivat ...See also:
Changing the set speed
After a speed has been set, it can be increased
or decreased by using the or
buttons.
Each time one of these buttons is pressed, the
vehicle's speed changes by 5 mph
(approximately 8 km/h). ...
Problems with the rear window defroster
The rear window defroster has deactivated itself prematurely or cannot be activated.
Switch off any consumers that are not required, e.g. reading lamps or
interior lighting.
When the battery ...
Customer Key Programming
If you have two valid Sentry Keys , you can program
new Sentry Keys to the system by performing the
following procedure:
1. Cut the additional Sentry Key Transponder blank(s)
to match the ignit ...