Subaru Forester: Double trip meter
Type A
Type B
The trip meter shows the distance that the vehicle has been driven since you last set it to zero.
To set the trip meter to zero, select the A trip or B trip meter by pushing the knob and keep the knob pushed for more than 2 seconds.
To ensure safety, do not attempt to change the function of the indicator during driving, as an accident could result.
NOTE
If the connection between the combination
meter and battery is broken for any
reason such as vehicle maintenance or
fuse replacement, the data recorded on
the trip meter will be lost.
Odometer
Type A Type B The odometer shows the total distance that the vehicle has been driven. ...Tachometer
The tachometer shows the engine speed in thousands of revolutions per minute. Do not operate the engine with the pointer of the tachometer in the red zone. This may cause severe damage to ...See also:
Rear combination lights
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
2. Slide the rear combination light assembly
rearward and remove it from ...
Waxing and polishing
Always wash and dry the vehicle before
waxing and polishing.
Use a good quality polish and wax and
apply them according to the manufacturer’s
instructions. Wax or polish when
the painted su ...
Moonroof (if so equipped)
- In an accident you could be thrown
from the vehicle through an open
moonroof. Always use seat belts
and child restraints.
- Do not allow anyone to stand up or
extend any portion of thei ...