Volvo XC60: Booster cushions - Safety - Volvo XC60 Owner's ManualVolvo XC60: Booster cushions

Securing a booster cushion

Position the child correctly on the booster cushion
Position the child correctly on the booster cushion

Booster cushions are recommended for children who have outgrown convertible seats.

1. Place the booster cushion in the rear seat of the vehicle.

2. With the child properly seated on the booster cushion, attach the seat belt to or around the cushion according to the manufacturer's instructions.

3. Fasten the seat belt by inserting the latch plate into the buckle (lock) until a distinct click is audible.

Positioning the seat belt
Positioning the seat belt

4. Ensure that the seat belt is pulled taut and fits snugly around the child.

WARNING
• The hip section of the three-point seat belt must fit snugly across the child's hips, not across the stomach.
• The shoulder section of the three-point seat belt should be positioned across the chest and shoulder.
• The shoulder belt must never be placed behind the child's back or under the arm.

    Convertible seats
    Securing a convertible seat with a seat belt Do not place the convertible seat in the front passenger's seat NOTE Refer to pages 47 and 48 for information on securing a child restraint using ...

    ISOFIX/LATCH lower anchors
    Using the ISOFIX/LATCH lower child seat anchors Lower anchors for ISOFIX/LATCH-equipped child seats are located in the rear, outboard seats, hidden below the backrest cushions. Symbols on the ...

    See also:

    Battery
    - Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. - Make certain the terminal connections are clean and securely tightened. - If the vehicle ...

    Automatic transaxle
    NOTICE ■Automatic transmission fluid type Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission ...

    Side lamps (green)
    Side lamps (green) Illuminates when the side lights are switched on. ...