Mitsubishi Outlander: Antenna - For pleasant driving - Mitsubishi Outlander Owner's ManualMitsubishi Outlander: Antenna

Roof antenna

To remove

Turn the pole (A) anticlockwise.

To install

Screw the pole (A) clockwise into the base (B) until it is securely retained.

Screw the pole (A) clockwise into the base (B) until it is securely retained.

NOTE:
● Be sure to remove the roof antenna in the following cases: • When going into an automatic car wash. • When placing a car cover over the vehicle.
● Before driving into a structure that has a low ceiling, fold down the antenna to prevent it from hitting the ceiling.

    Handling of compact discs
    ● Use only the type of compact discs that have the mark shown in the illustration below (playback of CD-R or CDRW discs may cause problems). ● The use of special shaped, damaged c ...

    Digital clock*
    Automatic mode and manual mode is available for digital clock adjustment: Select the automatic mode or the manual mode by performing the following operations: 1. Press the PWR switch (A) to tur ...

    See also:

    Front seatbelts
    1. Adjust the seat position according to the following procedure. Driver’s seat: Adjust the seatback to the upright position. Move the seat as far from the steering wheel as practical while s ...

    Automatic powerfold mirrors
    Powerfold mirrors can be configured to automatically fold when the vehicle is locked and unfold when unlocked. This function can be enabled/disabled by your Dealer/Authorised Repairer. Note: If ...

    Activating/deactivating the residual heat function
    It is possible to make use of the residual heat of the engine to continue heating the stationary vehicle for up to 30 minutes after the engine has been switched off. The heating time depends on th ...