Range Rover Evoque: After towing on four wheels
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Vehicle recovery / After towing on four wheels
1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.
2. Switch off the ignition and remove the Smart Key from the vehicle.
3. Remove the towing attachment and refit the cover panel to the front bumper.
Use extreme caution when
detaching
towing equipment. Vehicle movement
is possible which can result in serious
injury.
READ NEXT:
Before starting or driving
If the vehicle is involved in
a collision
it should be checked by a Dealer/
Authorised Repairer, or suitably
qualified persons, before starting or
driving.
Event data recording
Event data recorders are capable of collecting
and storing short sequences of data during a
crash or near-crash event. The recorded
information may assist in the investigation of
such an event. Th
SEE MORE:
Front Halfshaft LH
Special Tool(s)
205-857
Remover, Halfshaft
Removal
CAUTIONS:
Nuts and bolts must be tightened with the weight of the vehicle on the
suspension.
Do not allow halfshafts to hang unsupported at one end or joint damage will
occur.
Make sure the halfshaft constant velocity (CV) joints do not over art
Gradient release control (GRC)
With HDC activated, if the vehicle is stopped on
a slope using the foot brake, GRC will become
active (except in Terrain Response Sand
program). It operates in all gears and in neutral
position.
During a steep hill descent, when the foot brake
is released GRC will automatically hold brake
for
© 2011-2024 Copyright www.rrevoque.org
