Honda CR-V: Voice Control Tips - Bluetooth HandsFreeLink - Features - Honda CR-V Owner's ManualHonda CR-V: Voice Control Tips

Air or wind noise fromthe

Air or wind noise fromthe dashboard and side vents and all windows may interfere with the microphone. Adjust or close them as necessary.

Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.

Many commands can be spoken together. For example, you can say ‘‘Call 123-456-####’’ or ‘‘Dial Peter.’’

When HFL is in use, navigation voice commands cannot be recognized.

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

    Using HFL
    HFL Buttons HFL Talk button - Press and release to give a command or answer a call. HFL Back button - Press and release to end a call, go back to the previous command, or cancel the comm ...

    Help Features
    To hear general HFL information, including help on using HFL buttons, Voice control, or making a call, say ‘‘Tutorial.’’ For help at any time, including a list of available commands, ...

    See also:

    Economy
    Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement ...

    FM
    FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially aroun ...

    Wiper blade rubber replacement
    Windscreen wiper blades 1. Lift the wiper arm off the windscreen. 2. Pull the wiper blade until its stopper (A) disengages from the hook (B). Pull the wiper blade further to remove it. NOTE: & ...