GMC Terrain: Vehicle Messages
Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appear one after another.
Some messages may not require immediate action, but you can press SET/CLR to acknowledge that you received the messages and to clear them from the display. Some messages cannot be cleared from the DIC display because they are more urgent. These messages require action before they can be cleared. You should take any messages that appear on the display seriously and remember that clearing the messages will only make the messages disappear, not correct the problem. You will find the possible messages that can be displayed and some information about them grouped by subject in the following information.
Vehicle Messages
...Battery Voltage and Charging Messages
BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing certain features ...See also:
Ultrasonic Parking Assist
If available, Ultrasonic Rear Parking Assist (URPA) system uses sensors on the
rear bumper to assist with parking and avoiding objects while in R (Reverse). It
operates at speeds less than 8 km/h ...
Preparing the vehicle
WARNING
The wheel and tire size of the emergency spare wheel/spare wheel may differ to
that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling
characteristics ...
Starting your vehicle
Starting your vehicle
The remote control start system is activated
by pressing the “” button twice
within 3 seconds on your remote control
transmitter. The system will check certain
p ...