Dodge Nitro: Vehicle identification number - Introduction - Dodge Nitro Owner's ManualDodge Nitro: Vehicle identification number

The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel. The VIN is visible from outside of the vehicle through the windshield. This number also is stamped into the right front door sill (under the molding) and appears on the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration, and the title.

WARNING: Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.

CAUTION: An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended.

Vehicle Identification Number Vehicle Identification Number

NOTE: It is illegal to remove or alter the VIN.

    Warnings and cautions
    This Owner’s Manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage t ...

    Vehicle modifications/alterations
    WARNING: Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. ...

    See also:

    Centrally locking and unlocking the vehicle from the inside
    You can centrally lock or unlock the vehicle from the inside. The central locking/unlocking button does not lock or unlock the fuel filler flap. You cannot unlock the vehicle centrally from the ...

    Seat belt checks
    Note: If the vehicle is parked on an incline, the seat belt mechanism may lock. This is not a fault and the belt should be gently eased out from the upper anchorage. The seat belts should be inspe ...

    Programming A Non-Rolling Code
    For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...