Range Rover Evoque: Using the system
The system is operated using the remote
control.
To release the remote from the docked
position, press at the top of the remote (1) to
unlatch it.
Do not attempt to pull the
remote
control out of its docked position.
Using the appropriate button (6) or (10) or on
screen soft key (right or left) to select the
required screen, will allow options to be set
and selected.
Note: A help screen is available from each
screen/menu. To view the help screen for
guidance on the available functions and
options, touch the question mark (?) icon.
READ NEXT:
The volume control for each set of headphones
is adjusted on the headphones.
Press the channel selector button to cycle
through available channels. Select the channel
appropriate for the required
The remote control battery is automatically
recharged while the remote is docked. The
battery is not serviceable and should not be
changed or removed by the user.
SEE MORE:
Before raising the vehicle or changing a wheel,
ensure that you read and comply with the
following warnings.
Always find a safe place to
stop, off
the highway and away from traffic.
Ensure that the vehicle and jack are
both on firm level ground.
Apply the parking brake. Engage Park
(P) on
Removal
NOTES:
Some illustrations may show the engine removed for clarity.
Some variation in the illustrations may occur, but the essential information is
always correct.
1. Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. WARNING: Make sure to support the vehicle
© 2011-2024 Copyright www.rrevoque.org