Subaru Forester: To decrease the speed (by brake pedal) - To change the cruising speed - Cruise control - Starting and operating - Subaru Forester Owner's ManualSubaru Forester: To decrease the speed (by brake pedal)

1. Depress the brake pedal to release cruise control temporarily.

2. When the speed decreases to the desired speed, press the “SET/COAST” button once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal.

    To decrease the speed (by button)
    To decrease the speed (by button) Push the “SET/COAST” button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be ...

    Cruise control indicator light
    Refer to “Cruise control indicator light”. ...

    See also:

    Special operating conditions
    If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditi ...

    Anti-lock brake system
    The Anti-Lock Brake System (ABS) is designed to aid the driver in maintaining vehicle control under adverse braking conditions. The system operates with a separate computer to modulate hydraulic ...

    Fault tracing and actions
    If the message Radar blocked See manual is displayed, this means that the radar signals from the sensor have been obstructed and that a vehicle ahead cannot be detected. This, in turn, means th ...