Subaru Forester: Temperature gauge (models with type A combination 
meter) - Meters and gauges - Keys and doors - Subaru Forester Owner's ManualSubaru Forester: Temperature gauge (models with type A combination meter)

1) Normal operating range

1) Normal operating range

The temperature gauge shows engine coolant temperature when the ignition switch is in the “ON” position.

The coolant temperature will vary in accordance with the outside temperature and driving conditions.

We recommend that you drive moderately until the pointer of the temperature gauge reaches near the middle of the range.

Engine operation is optimum with the engine coolant at this temperature range and high revving operation when the engine is not warmed up enough should be avoided.

If the pointer exceeds the normal

If the pointer exceeds the normal operating range, safely stop the vehicle as soon as possible.

Refer to “Engine overheating”.

    Low fuel warning light
    The low fuel warning light illuminates when the tank is nearly empty [approximately 2.6 US gal (10.0 liters, 2.2 Imp gal)]. It only operates when the ignition switch is in the “ON” positio ...

    ECO gauge (models with type A combination meter)
    The unit displayed varies depending on the model. The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate ...

    See also:

    Trailer Sway Control (TSC)
    The vehicle has a Trailer Sway Control (TSC) feature as part of the StabiliTrak system. If TSC detects that the trailer is swaying, the vehicle's brakes are automatically applied. When TSC ...

    Examples of the types of accidents in which it is possible that the SRS side airbag and the SRS curtain airbag will deploy.
    1) Hitting a curb, edge of pavement or hard surface 2) Falling into or jumping over a deep hole 3) Landing hard or vehicle falling It is possible that the SRS side and curtain airbags will ...

    Blower control
    Turn the control clockwise to increase or counterclockwise to decrease the blower speed. If AUTO is selected, blower speed will be regulated automatically and this will override manual a ...