Jeep Liberty: Supported MP3 File Formats - Notes On Playing MP3 Files - Media Center 130 With Satellite Radio (Sales Code RES+RSC) - Understanding Your Instrument Panel - Jeep Liberty Owner's ManualJeep Liberty: Supported MP3 File Formats

The radio will recognize only files with the *.MP3 extension as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.

When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3 files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates.

ID3 Tag information for artist, song title, and album title

ID3 Tag information for artist, song title, and album title are supported for version 1 ID3 tags. ID3 version 2 is not supported by the radios.

Playlist files are not supported. MP3 Pro files are not supported.

    Supported Medium Formats (File Systems)
    The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, th ...

    Playback of MP3 Files
    When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 fi ...

    See also:

    Turn Signals
    Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights. Turn Signal Control NOTE: ...

    Location of taillight bulbs
    Taillight lens, right side 1 Parking/side marker lights (LED) 2 Side reflector 3 Brake light 4 Backup light 5 Turn signal 6 Brake lights (LED) NOTE If an error message remains in the display ...

    Brake Master Cylinder
    The fluid in the master cylinder should be checked when performing under hood services or immediately if the “Brake Warning Light” is illuminated. Be sure to clean the top of the master cylin ...