Range Rover Evoque: Stop/start (manual transmission only)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine / Stop/start (manual transmission only)
The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on.
When the engine has been stopped by the stop/start system, the ECO icon will illuminate.
When the vehicle comes to a stop, neutral is selected and the clutch is fully released, the engine automatically switches off.
When the clutch is depressed prior to selecting a gear, the engine automatically restarts.
READ NEXT:
Conditions preventing automatic engine stop
The engine will not automatically stop if:<>
- the external temperature is below approximately 0°C (32°F)
- the external temperature is above approximately40°C (104°F)
- engine has not re
Conditions causing automatic engine restart
The engine will automatically start if:<>
- climate control system demand increases
- the vehicle’s speed reaches approximately 4km/h (2.5mph)
- HDC or a Terrain Response special program ar
Disabling stop/start
Disabling stop/start
To switch the system off (preventing automatic
stop/start) press the ECO switch. The LED
indicator will extinguish to confirm that the
system is off.
Note: The engine will
SEE MORE:
Power Steering FWD
Component Location
Steering gear
Rubber seal assembly
Heat shield
Overview
The vehicle is fitted with EPS (electric power steering), provided by a ZF
Servolectric steering gear unit with variable
ratio, rack and pinion steering and speed sensitive power assistance. Power
assistance is from a
Dynamic stability control (amber)
Dynamic stability control (amber)
Illuminates briefly when the
ignition is switched on and
extinguishes when the engine is
started. If the lamp flashes while driving, the
DSC system is active. If the lamp illuminates
continuously while driving, there is a fault with
the DSC system. The vehi
© 2011-2024 Copyright www.rrevoque.org
