GMC Terrain: Starting the Vehicle - Remote Vehicle Start - Initial Drive Information - In Brief - GMC Terrain Owner's ManualGMC Terrain: Starting the Vehicle

1. Press and release Keyless Entry transmitter. on the Remote Keyless Entry transmitter.

2. Press and hold seconds. The turn signal lamps will briefly flash to confirm the vehicle has been for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.

3. The key must be inserted and turned to ON/RUN before driving.

The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.

    Remote Vehicle Start
    With this feature the engine can be started from outside of the vehicle. ...

    Canceling a Remote Start
    To cancel a remote start, do one of the following: ○ Press until the parking lamps turn off. ○ Turn on the hazard warning flashers. ○ Insert the key and turn it to ON/ RUN and ...

    See also:

    Steep slopes
    If the vehicle is stationary on a steep, slippery slope, it may begin to slide even with the brakes applied. This is because without wheel rotation, the ABS cannot determine vehicle movement. To ...

    To Load a Disc
    The in-dash disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc slot appears. Insert a di ...

    Before programming
    When programming a device that may require you to press and re-press the hand-held transmitter (cycle), unplug the device during the cycling process to prevent possible motor failure. For best ...