GMC Terrain: Starting the Engine Using Remote Start - Remote Vehicle Start - Keys and Locks - Keys, Doors, and Windows - GMC Terrain Owner's ManualGMC Terrain: Starting the Engine Using Remote Start

To start the engine using the remote start feature:

1. Press and release transmitter. on the RKE transmitter.

2. Press and hold seconds. The turn signal lamps will briefly flash to confirm the vehicle has been for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The parking lamps will turn on and remain on as long as the engine is running. The vehicle's doors will be locked.

3. The key must be inserted and turned to ON/RUN before driving.

The engine will shut off after 10 minutes unless a time extension is done or the key is inserted and turned to ON/RUN.

    Remote Vehicle Start
    The vehicle may have this feature that allows you to start the engine from outside the vehicle. (Remote Vehicle Start): This button will be on the RKE transmitter if the vehicle has remote start. ...

    Extending Engine Run Time
    For a 10-minute extension, repeat Steps 1 and 2 while the engine is still running. The remote start can be extended once. When the remote start is extended, the second 10 minutes will start immedia ...

    See also:

    Dial By Saying A Number
    • Press the button to begin. • After the “Ready” prompt and the following beep, say “Dial”. • The system will prompt you to say the number you want to call. • For example, you ...

    Operation
    Press the button in the center instrument panel to switch this function on or off. The indicator light in the button illuminates when the function is on. Depending on the optional equipment ...

    Calculating fuel economy
    1. Fill the fuel tank completely and record the initial odometer reading (in miles or kilometers). 2. Each time you fill the tank, record the amount of fuel added (in gallons or liters). 3. After ...