Controls. Warning Lights, Gauges, and Indicators. StabiliTrak® OFF Light">

GMC Terrain: StabiliTrak® OFF Light - Warning Lights, Gauges, and<span lang= Indicators - Instruments and Controls - GMC Terrain Owner's Manual" border="0" width="100" align=right style="margin: 0px 3px 0 3px">GMC Terrain: StabiliTrak® OFF Light

This light comes on when the StabiliTrak system is turned off. If the Traction

This light comes on when the StabiliTrak system is turned off. If the Traction Control System (TCS) is off, wheel spin is not limited. If the StabiliTrak system is off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak system and the warning light turns off.

Check the DIC for applicable messages. See Ride Control System Messages on page 5‑30 for more information.

See Traction Control System (TCS) on page 9‑35 and StabiliTrak® System on page 9‑36 for more information.

    Traction Off Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The tract ...

    Traction Control System (TCS)/StabiliTrak® Light
    The StabiliTrak system or the Traction Control System (TCS) indicator/warning light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your ...

    See also:

    Catalytic Converter
    Catalytic Converter The purpose of the catalytic converter is to minimize the amount of harmful pollutants in your vehicle’s exhaust. Use of leaded fuel in vehicles equipped with catalytic con ...

    Engine starting: automatic transmission
    1. A valid Smart Key must be inside the vehicle. 2. Make sure the gear selector is in P or N. 3. Firmly depress the brake pedal. 4. Press and release the start button. The engine will crank autom ...

    Stage 1: Sealing the hole
    1. Open the cover on the tire sealing kit. 2. Peel off the speed limit sticker and affix it to the steering wheel hub where it will be clearly visible to the driver. 3. Ensure that the on/off sw ...