Nissan Rogue: Setting hazard indicator and horn mode - How to use remote keyless entry system - Remote keyless entry system (if so equipped) - Pre-driving checks and adjustments - Nissan Rogue Owner's ManualNissan Rogue: Setting hazard indicator and horn mode

This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.

In hazard indicator and horn mode, when the LOCK hazard button 1 is pushed, the hazard indicator flashes twice and the horn chirps once.

When the UNLOCK pushed, button 2 is pushed, the hazard indicator flashes once.

If the horn chirp is not necessary, you can switch to hazard indicator only mode by following the switching procedure.

In hazard indicator only mode, when the LOCK indicator button is pushed, the hazard indicator flashes twice. When the UNLOCK button is button is pushed, neither the hazard indicator nor the horn operates.

Switching procedure:

Switching procedure:

To switch the hazard indicator and horn operation, push the LOCK 1 and UNLOCK 2 buttons on the keyfob simultaneously for more than 2 seconds.

- When the hazard indicator mode is set, the hazard indicator flashes 3 times.

- When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.

Intelligent Key system (if so equipped)

    Using panic alarm
    If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button 3 on the keyfob for more than 1 second. 2. The theft warn ...

    Intelligent Key system (if so equipped)
    - Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before u ...

    See also:

    Starting the Vehicle
    1. Press and release on the Remote Keyless Entry transmitter. 2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The pa ...

    Automatic transmission
    Shift the transmission to position P. The transmission position display in the multifunction display shows P. You can also start the engine when the transmission is in position N. ...

    Instrument Cluster
    Instrument Cluster 1. Speedometer 2. Odometer/Tripmeter 3. Odometer/Tripmeter selector and meter illumination cancel knob 4. Tachometer 5. Fuel gauge 6. Temperature gauge 7. Warning and indicato ...