Jeep Liberty: Selec-Trac II Transfer Case – If Equipped
- Operating Information And Precautions
- Shift Positions
- Transfer Case Position Indicator Lights
- Shifting Procedures
Shifting Procedures
NOTE: If any of the requirements to select a new
transfer case position have not been met, the transfer case
will not shift, the indicator light for the previous position
will remain on, and the ...
Operating Information And Precautions
The Selec-Trac II active on-demand transfer case provides
four positions:
• Two-wheel drive (2WD) high range
• Four-wheel drive Auto (4WD AUTO) high range
• Neutral (N)
• Four-wheel ...
See also:
When you do not tow a trailer
- Remove the ball mount from the hitch
receiver tube and insert the receiver cover
onto the hitch receiver tube.
- Place the dust cap over the four-pin
connector of the hitch wire harness to
...
Manual Front Seat Adjustments
For models equipped with manual seats, the driver and
passenger seats can be adjusted forward or rearward by
using a bar by the front of the seat cushion, near the floor
Manual Seat Adjustment
...
Locking doors
1. Turn the ignition switch to the LOCK position.1
2. Carry the Intelligent Key with you.
3. Close all the doors.2
4. Push the door handle request switch (driver’s or front passenger’s) A or ...
