Toyota RAV4: Seat heaters - Other interior features - Interior features - Toyota RAV4 Owner's ManualToyota RAV4: Seat heaters

1 Heats the driver’s seat

1 Heats the driver’s seat
2 Heats the front passenger’s seat

The indicator light is on while the seat heater is operating. Push the switch once again to turn off the seat heater.

■The seat heaters can be used when

Vehicles without smart key system

The engine switch is in the “ON” position.

Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns:

• Babies, small children, the elderly, the sick and the disabled
• Persons with sensitive skin
• Persons who are fatigued
• Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.)

●Do not cover the seat with anything when using the seat heater. Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.

NOTICE
■To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

■To prevent battery discharge
Turn the switches off when the engine is not running.

    Power outlets
    The power outlet can be used for a following component. 12 V: Accessories that use less than 10 A. 120 VAC: Accessories that use less than 100 W. ■ 12 V Type A Type B Type C σ ...

    Armrest
    To use the armrest, pull the strap forward and fold down the center seatback. NOTICE ■To prevent damage to the armrest Do not place too much strain on the armrest. ...

    See also:

    Pairing and connecting from your mobile phone
    Note: The process of pairing and connecting your phone with the vehicle using the mobile phone, will vary depending on the type of mobile phone used. 1. Switch the ignition on and ensure that the ...

    Displaying and selecting preset stations (type D audio)
    1. Press the button for 1.5 seconds or longer during AM/FM reception to display the radio screen. 2. Operate the “TUNE/TRACK/CH” dial to select the stations. ...

    Compass Variance
    Refer to “Compass Display” for more information. ...