Jeep Liberty: Remote Keyless Entry (RKE)
This system allows you to lock or unlock the doors and liftgate, open the liftgate flip-up window, or activate the PANIC alarm from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system. However, the line of transmission must not be blocked with metal objects when using the RKE transmitter.
NOTE: Inserting the key into the ignition switch disables all buttons on the RKE transmitter.
Vehicle Key
- To Unlock The Doors And Liftgate
- To Lock The Doors And Liftgate
- To Unlatch The Liftgate Flipper Glass
- Using The Panic Alarm
- Programming Additional Transmitters
- Battery Replacement
- General Information
Illuminated Entry
The courtesy lights will turn on when you use the Remote Keyless Entry (RKE) transmitter to unlock the doors or open any door. This feature also turns on the approach lighting in the outside mi ...To Unlock The Doors And Liftgate
Press and release the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice to unlock all doors and the liftgate. The turn signal lights will flash to acknowledge the ...See also:
Sitting in the correct position
The driver
and front seat passenger
must not ride with the seat fully
reclined.
Do not adjust
the seat while the
vehicle is moving.
The seat, head restraint, seat belt and airbags,
all con ...
Power-Up
After switching the ignition key from OFF to either the
ON or ACC position, or after a language change, you
must wait at least fifteen seconds prior to using the
system.
...
Redial
1. Select the “REDIAL” menu.
2. Press the OFF hook switch .
3. Select the desired number by turning
the “TUNE/TRACK/CH” dial.
4. Perform either of the following procedures.
– Press the ...