Honda CR-V: Receiving XM Radio Service - Playing the XM Radio (EX-L model with navigation system) - Features - Honda CR-V Owner's ManualHonda CR-V: Receiving XM Radio Service

If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or ON (II) position, push the power/volume knob to turn on the audio system and press the CD/XM button. A variety of music types and styles will play.

If you decide to purchase XM Radio service, contact XM Radio at www.xmradio.com, or at 1-800-852-9696. In Canada, contact XM CANADA at www.xmradio.ca, or at 1-877-209-0079. You will need to give them your radio I.D. number and your credit card number. To get your radio I.D. number, press the TUNE bar until ‘‘0’’ appears in the display. Your I.D. will appear in the display.

After you’ve registered with XM Radio, keep your audio system in the XM radio mode while you wait for activation. This should take about 30 minutes.

While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, you’ll be able to listen to XM Radio broadcasts.

XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM Radio. In Canada, contact XM CANADA .

    XM Radio Display Messages
    ‘‘LOADING’’ - XM is loading the audio or program information. ‘‘OFF AIR’’ - The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ - The encryption ...

    Playing a Disc (EX-L model with navigation system)
    Playing a Disc (EX-L model with navigation system) ...

    See also:

    How Your Side Curtain Airbags Work
    In a Side Impact In a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate the side curtain airbag. If the impact is on ...

    Connecting a device to the A/V-AUX socket
    The A/V-AUX socket is located under the center armrest in the tunnel console 1. Connect the device's video cable to the yellow connector. 2. Connect the left audio cable to the white connector ...

    Activating and deactivating the alarm system
    To change the setting of your vehicle’s alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to “Disarming the system”. 2. Sit in the driver ...