Jeep Liberty: Rear Head Restraints
The two outboard seat are equipped with adjustable head restraints. To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the adjustment button, located on the base of the head restraint, and push downward on the head restraint.
Adjustment Button
NOTE:
• The head restraints should only be removed by qualified
technicians, for service purposes only. If either of
the head restraints require removal, see your authorized
dealer.
• Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for information on tether routing.
WARNING!
Driving a vehicle with the head restraints removed or
improperly adjusted could cause serious injury or
death in the event of a collision. The head restraints
should be checked prior to operating the vehicle and
never adjusted while the vehicle is in motion.
Active Head Restraints — Front Seats
Active Head Restraints are passive, deployable components,
and vehicles with this equipment cannot be readily
identified by any markings, only through visual inspection
of the head restraint. Th ...
60/40 Split Folding Rear Seat With Fold-Flat Feature
To provide additional storage area, each rear seat can be
folded flat. This allows for extended cargo space and still
maintains some rear seating room.
NOTE: Prior to folding the rear seat, it ma ...
See also:
Automatic operation
1. To open the sun shade completely, pull the
control as far back as possible (to the auto
open position) and release it.
2. To fully open the laminated panoramic
roof, pull the control as far ...
Emergency starting
Jump starting Jump starting can be dangerous if done incorrectly. Therefore,
to avoid harm to yourself or damage to your vehicle or battery, follow the jump
starting procedures listed on page 6-6. ...
Roof rack
If the vehicle has a roof rack, you can load things on top of your vehicle. Crossrails
and fixing components to adapt the roof rack on your vehicle may be obtained from
an authorized Kia dealer. ...