Mercedes-Benz GLK-Class: Preparing the vehicle - Changing a wheel and mounting the spare wheel - Flat tire - Breakdown assistance - Mercedes-Benz GLK-Class Owner's ManualMercedes-Benz GLK-Class: Preparing the vehicle

WARNING WARNING

The wheel and tire size of the emergency spare wheel/spare wheel may differ to that of the damaged wheel. When using an emergency spare wheel/spare wheel the handling characteristics of the vehicle may change.

Adapt your style of driving accordingly. Never operate the vehicle with more than one emergency spare wheel/spare wheel that differs in size.

Only use an emergency spare wheel/spare wheel of a differing size briefly and do not switch off ESPВ®.

When using an emergency spare wheel, you must not exceed the maximum speed of 50 mph (80 km/h).

WARNING WARNING

Have the emergency spare wheel/spare wheel replaced with a new wheel as soon as possible at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop.

a tire-change tool kit at the factory. For more information on which tools are required Vehicles without a spare wheel/ emergency spare wheel are not equipped with a tire-change tool kit at the factory. For more information on which tools are required to perform a wheel change on your vehicle, e.g. wheel chock, lug wrench or alignment bolt, consult an authorized Mercedes-Benz Center.

  • Prepare the vehicle as described ().
  • If a trailer is coupled to the vehicle, uncouple it.
  • Remove the following items (depending on the vehicle's equipment) from the stowage well under the trunk floor:
  • the emergency spare wheel
  • the wheel bolts for the emergency spare wheel
  • the tire inflation compressor
  • the lug wrench
  • the folding wheel chock
  • the jack
  • the ratchet wrench
  • Secure the vehicle to prevent it from rolling away.
    Securing the vehicle to prevent it from rolling away
    WARNING Only jack up the vehicle on level ground or on slight inclines/declines. The vehicle could otherwise fall off the jack and injure you or others. If your vehicle is equipped with a whe ...

    See also:

    Electronic speed control
    When engaged, the Electronic Speed Control takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Control lever is located on the right side of the s ...

    Cup Holder and Storage Bin (if equipped)
    Cup holders and a storage bin are provided as shown. To access a bin, push the release button. To use the console bin, pull the lever up and open the lid. To use the rear cup holders, open th ...

    Tire Identification Number (TIN)
    Tire Identification Number (TIN) is marked on the intended outboard sidewall. The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown of its individual element ...