GMC Terrain: Power Liftgate Operation
On vehicles with a power liftgate, the vehicle must be in P (Park) to use the power feature. The taillamps flash when the power liftgate moves.
Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could damage the liftgate or the liftgate glass. Always check to make sure the area above and behind the liftgate is clear before opening it.
Choose the power liftgate mode by turning the dial on the switch to either the 3/4 or MAX position. Press8to open or close the liftgate.
Manual Liftgate Operation
Unlock the vehicle before opening the liftgate.
Press the touch pad located in the handle of the liftgate, above the license
plate, and lift up to open. Do not press the touch pad while closing the ...
Windows
Press the front of the switch to lower the window. Pull the switch up to raise
it.
Pushing or pulling the switch part of the way will open or close the window as
long as the switch is operated. ...
See also:
Intelligent Key system (if so equipped)
- Radio waves could adversely affect
electric medical equipment. Those
who use a pacemaker should contact
the electric medical equipment
manufacturer for the possible influences
before u ...
Bluetooth®
NOTE
The Bluetooth word mark and logo are
registered trademarks of Bluetooth
SIG, Inc.
It is possible to connect a cell phone to the
in-vehicle equipment through the Bluetooth
® format ( ...
Security
It is advised to erase all channels before you sell or turn
in your vehicle.
To do this, press and hold the two outside buttons for
20 seconds until the red indicator flashes. Note that all
cha ...