Toyota RAV4: Locking and unlocking the doors with the mechanical key
Using the mechanical key in order to perform the following operations:
1 Locks all doors
2 Unlocks all doors
Turning the key unlock the driver’s door. Turning the key once again unlocks the other doors.
If the electronic key does not operate properly (vehicles with smart key
system)
If communication between the electronic key and the vehicle is interrupted or
the electronic key cannot be used because the
battery is depleted, the smart key system and wireless remote control
ca ...
Starting the engine
1 Shift the shift lever to P and apply the brakes.
Touch the Toyota emblem side of
the electronic key to the
“ENGINE START STOP” switch.
If any of the doors is opened and
closed while the k ...
See also:
Turn-signal lever
1- Turn-signals. When making a normal turn, use position (1). The lever will
return automatically when cornering is completed. 2- Lane-change signals. When moving
the lever to (2) slightly to ch ...
Four Wheel Drive (4WD) System (if equipped)
WARNING: For important information regarding safe operation
of this type of vehicle, see Preparing to drive your vehicle in
this chapter.
Your vehicle is equipped with an intelligent 4WD System th ...
Setting a speed
Use the or
buttons set the vehicle's current
speed. The set speed is shown in the display.
NOTE
Cruise control cannot be engaged at
speeds below 20 mph (30 km/h). ...
