Range Rover Evoque: Keyless locking - Exiting the vehicle - Land Rover Range Rover Evoque Owner's ManualRange Rover Evoque: Keyless locking

with Never double lock the vehicle with people, children or pets inside. In the event of an emergency they would be unable to escape and the emergency services would be unable to release them quickly.

detected if it The Smart Key may not be detected if it is placed within a metal container or if it is shielded by a device with a back-lit LCD screen, such as a smart phone, laptop (including laptop bag), games console etc.

The vehicle will not lock automatically.

The vehicle will not lock automatically.

Note: Keyless locking will activate only if the Smart Key is detected outside the vehicle. If no Smart Key is present, no locking will occur.

- To single lock the vehicle, touch the lock sensor (1) on a door handle once. The hazard warning lamps will flash once to confirm locking. Power fold mirrors will fold in (if enabled).

- To double lock the vehicle, touch (1) twice within 3 seconds. The hazard warning lamps will flash twice to confirm (with a long second flash). Power fold mirrors will fold in (if enabled). An audible confirmation may also be given (if enabled).

Note: When locking the vehicle via Keyless locking, if one or more of the doors, the bonnet or the tailgate is not fully closed, or the ignition is ON, the vehicle will NOT lock. There will be NO audible mislock error warning. The hazard warning lamps will NOT flash and the door mirrors (if enabled) will NOT fold in. Check that all doors, the bonnet and the tailgate are closed properly. Ensure the ignition is turned OFF and lock the vehicle again. If the mislock persists, consult a Land Rover Dealer/Authorised Repairer.

    Global closing
    Ensure that no children, pets, or obstructions are in any open aperture before operating global closing. Ensure that all doors are closed. Press and hold the Smart Key lock button for 3 seconds ...

    Keyless global closing
    To initiate global window closing (if enabled), touch and hold the lock sensor (1) for 3 seconds. This will also single lock the vehicle and activate the alarm. Note: The windows will close only w ...

    See also:

    Transfer Switch (if equipped)
    Transfer Switch (if equipped) The transfer switch is located on the center of the instrument panel. For details on how to use this switch, refer to “Using the Transfer Switch” in the “OPER ...

    Garage door opener programming in the U.S.A.
    NOTE When programming the HomeLink® Wireless Control System for a garage door opener, it is suggested that you park the vehicle outside the garage. 1. Unplug the motor of the garage door o ...

    Lamps On Reminder
    For vehicles with the lamps on reminder light, it comes on when the lights are in use. ...