Jeep Liberty: Jack Location - Jacking And Tire Changing - What To Do In Emergencies - Jeep Liberty Owner's ManualJeep Liberty: Jack Location

The scissor-type jack and tire changing tools are located in the cargo compartment behind a trim cover on the left rear trim panel. The latch is located at the bottom of the trim cover.

Jack Storage Location
Jack Storage Location

    Jacking And Tire Changing
    WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing ...

    Spare Tire Stowage
    The spare tire is stowed underneath the rear of the vehicle and is held in place by a cable winch mechanism. ...

    See also:

    Engine Overheating
    The vehicle has an indicator to warn of engine overheating. There is an engine coolant temperature warning light on the vehicle's instrument panel. See Engine Coolant Temperature Gauge on page ...

    Changing the coolant
    Never attempt to remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray ...

    Traction Control System (TCS)
    The vehicle has a Traction Control System (TCS) that limits wheel spin. On a front-wheel-drive vehicle, the system operates if it senses that one or both of the front wheels are spinning or beginn ...