GMC Terrain: Instrument Panel Fuse Block - Electrical System - Vehicle Care - GMC Terrain Owner's ManualGMC Terrain: Instrument Panel Fuse Block

The instrument panel fuse block is located on the passenger side panel of the

The instrument panel fuse block is located on the passenger side panel of the center console. To access the fuses, open the fuse panel door from the passenger side by pulling it out.

To reinstall the door, insert the tabs on the top of the door into the console first, then push the door back into its original location.

The vehicle may not be equipped with all of the fuses, relays, and features shown.

Wheels and Tires Instrument Panel Fuse Block

    Engine Compartment Fuse Block
    To remove the fuse block cover, squeeze the clips on the cover and lift it straight up. See Engine Compartment Overview on page 10‑6. Notice: Spilling liquid on any electrical component on ...

    See also:

    Use of engine braking
    Remember to make use of engine braking in addition to foot braking. When descending a grade, if only the foot brake is used, the brakes may start working improperly because of brake fluid over ...

    Displayed area
    Vehicles without spare tire The area covered by the camera is limited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed ...

    Two separate circuits
    Your vehicle has two separate circuit brake systems. Each circuit works diagonally across the vehicle. If one circuit of the brake system should fail, the other half of the system still works. ...