Subaru Forester: Initializing the registered data - Bluetooth® setting - Hands-free system (if equipped) - Audio - Subaru Forester Owner's ManualSubaru Forester: Initializing the registered data

To initialize the registered data, perform the following procedure.

1. Select the “INITIALIZE” menu.

2. Select the “CONFIRM” menu. First “PLEASE WAIT”, then “INITIALIZED” is displayed. The registered data is initialized and the mode changes to the last mode.

    Setting guidance volume
    To set the guidance volume, perform the following procedure. 1. Select the “GUIDANCE VOL”/“GUIDANCE VOLUME” menu. 2. Set the guidance volume by operating the “TUNE/TRACK/CH” dial. ...

    Selecting language
    To select the language, perform the following procedure. 1. Select the “SEL LANGUAGE”/“SELECT LANGUAGE” menu. 2. Select the desired language by operating the “TUNE/TRACK/CH” dial. ...

    See also:

    Headlamps
    Moving the nearside headlamp unit to access bulbs; 1. Remove the two plastic fixings. 2. Pull the tube up to release from the air box. This will allow more room for manoeuvrability. 3. Remove ...

    Emergency starting
    Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow the jump starting procedures listed on page 6-6. ...

    Change intervals
    The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using an engine oil and filter other than the specified quality, or exceed ...