GMC Terrain: How to Detect a Tamper Condition - Anti-theft Alarm System - Vehicle Security - Keys, Doors, and Windows - GMC Terrain Owner's ManualGMC Terrain: How to Detect a Tamper Condition

If an attempted break-in has occurred while the system was armed. is pressed and the horn sounds, an attempted break-in has occurred while the system was armed.

If the alarm has been activated, the THEFT ATTEMPTED message will appear on the DIC. See Key and Lock Messages on page 5.29 for additional information.

    Disarming the System
    To disarm the system, do one of the following: ○ Press on the RKE transmitter. ○ Turn the ignition to ON/RUN. ○ Allow the alarm to time out after about 30 seconds and reset itsel ...

    Immobilizer
    See Radio Frequency Statement on page 13.21 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. ...

    See also:

    Important safety notes
    WARNING If you tow the vehicle, you must use a rigid towing bar if: the engine is not running. there is a brake system malfunction. there is a malfunction in the power supply or the vehi ...

    Programming The Memory Feature
    To create a new memory profile, perform the following: NOTE: Saving a new memory profile will erase an existing profile from memory. 1. Turn the ignition ON. 2. Adjust all memory profile settings ...

    To engage the service mode
    Turn the ignition switch to the “ON” position, depress and hold the brake pedal, then press and release the “” button on the remote control transmitter three times. The system will pau ...