Volvo XC60: High beam flash
Move the lever toward the steering wheel to position 1. The high beams come on until the lever is released.
High/low beam headlights
Headlight switch and lever 1 High beam flash 2 Toggle between high and low beams ...High/low beam headlights
Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high an ...See also:
Reverse Gear Wipes
If the rear wiper control is off, the rear wiper will automatically operate continuously
when the shift lever is in R (Reverse), and the front windshield wiper is performing
low or high speed wipe ...
Starting the Engine
1. Apply the parking brake.
2. In cold weather, turn off all
electrical accessories to reduce
the drain on the battery.
3. Make sure the shift lever is in
Park. Press on the brake pedal.
4. W ...
Audible/visual alarm signal
• An audible alarm signal is given by a battery
powered siren. The alarm cycle lasts
for 30 seconds.
• The visual alarm signal is given by flashing
all turn signals for approximately 5 minu ...