GMC Terrain: Heated Front Seats - Front Seats - Seats and Restraints - GMC Terrain Owner's ManualGMC Terrain: Heated Front Seats

WARNING

If you cannot feel temperature change or pain to the skin, the seat heater may cause burns even at low temperatures. To reduce the risk of burns, people with such a condition should use care when using the seat heater, especially for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket, cushion, cover, or similar item. This may cause the seat heater to overheat. An overheated seat heater may cause a burn or may damage the seat.

Uplevel Climate Control System Shown, Base Similar

Uplevel Climate Control System Shown, Base Similar

If available, the buttons are near the climate controls. To operate, the ignition must be in ON/RUN.

Press to heat the driver or passenger seat or cushion and seatback. to heat the driver or passenger seat cushion and seatback.

Press the button once for the highest setting. With each press of the button, the heated seat will change to the next lower setting, and then the off setting. Three lights indicate the highest setting, and one light indicates the lowest.

The passenger seat may take longer to heat up.

Easy Exit Driver Seat
This feature moves the seat rearward allowing the driver more room to exit the vehicle. To activate, turn the ignition off and open the driver door. If the driver door is already open, turning th ...

Remote Start Heated Seats
When it is cold outside, the heated seats can be programmed to turn on automatically during a remote vehicle start. The heated seats will be canceled when the ignition is turned on. Press the heat ...

See also:

Conditions in which front passenger’s SRS frontal airbag is not activated
The front passenger’s SRS frontal airbag will not be activated when any of the following conditions are met regarding the front passenger’s seat: - The seat is empty. - The seat is equipp ...

Replacing the battery
- Do not let dust, oil or water get on or in the transmitter when replacing the battery. - Be careful not to damage the printed circuit board in the transmitter when replacing the battery ...

Fuses
If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any elect ...