Subaru Forester: Hazard warning flasher
Hazard warning flasher
The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions.
The hazard warning flasher works regardless of the position of the ignition switch.
To turn on the hazard warning flasher, push the hazard warning button on the instrument panel. To turn off the flasher, push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.
Ignition switch light
For easy access to the ignition switch in
the dark, the ignition switch light illuminates
when the driver’s door is opened or
when the driver’s door is unlocked using
the remote keyless en ...
Meters and gauges
NOTE
Liquid-crystal displays are used in
some of the meters and gauges on
the combination meter. You will find
their indications hard to see if you wear
polarized glasses. ...
See also:
Stopping and securing the vehicle
1. Park on a level surface, set the
parking brake and activate hazard
flashers.
2. Place gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual transmission)
and turn engine ...
Service Station Guide
1. Fuel.
2. Engine hood.
3. Tire changing tools.
4. Engine oil dipstick <Yellow>.
5. Automatic transmission fluid dipstick <Red>.
6. Engine coolant.
7. Windshield washer flu ...
Driving through water
• The vehicle can be driven through water up
to a depth of approximately 10 in. (25 cm),
at a maximum speed of 6 mph (10 km/h).
• Take particular care when driving through
flowing water.
â ...
