Jeep Liberty: General Cleaning - Sky Slider™ Top Care - Maintenance Procedures - Maintaining Your Vehicle - Jeep Liberty Owner's ManualJeep Liberty: General Cleaning

Careful vacuuming of the top before washing is helpful in removing dust and other foreign particles.

If Hand Washing:

• Wash in partial shade instead of direct sun.

• Wet the entire vehicle before washing the top.

• Wash the top with a soft, natural bristle scrub brush, and a mild soap solution such as liquid dish washing soap. Do not use detergent.

• Scrub in all directions, covering an area of about two square feet at a time. Avoid heavy scrubbing.

• Rinse the entire vehicle with water to remove all soap and dirt from the top fabric and to prevent streaking on painted and chrome surfaces.

• Allow the top to dry before opening. Vacuuming the top with a wet/dry shop vacuum will decrease the tops drying time, ensure removal of all dirt, and delete streaks in the material.

• Multiple cleanings may be necessary to remove stubborn stains. If stains persist, contact your local authorized dealership for further suggestions.

CAUTION!
Never use an abrasive type cleaner or bleaches.

Cleaners should not contain silicones, organic solvents, petroleum distillates, or plasticizers. Always wait until the top is thoroughly dry before opening it.

    Washing
    Hand washing or an automatic car wash with a soft cloth system is preferred. CAUTION! Avoid pointing a high-pressure hand held spray wand directly at the sides of the top, as this can damage ...

    Additional Cleaning Procedure
    For additional cleaning assistance in removing stubborn stains, apply MOPAR Convertible Cloth Top Cleaner or equivalent to the complete stain, extending 2 in (50 mm) beyond the stain. With a sof ...

    See also:

    Roadside Assistance
    Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is ...

    Starting the engine
    Do not operate the starter motor continuously for more than 10 seconds. If the engine fails to start after operating the starter for 5 to 10 seconds, wait for 10 seconds or more before tr ...

    To Lock The Doors And Liftgate
    Press and release the LOCK button on the RKE transmitter to lock all doors and the liftgate. The turn signal lights will flash and the horn will chirp to acknowledge the lock signal. ...