Toyota RAV4: Gauges and meters
Vehicles without smart key system
The following gauges, meters and displays illuminate when the engine switch is in the “ON” position.
Vehicles with smart key system
The following gauges, meters and displays illuminate when the “ENGINE START STOP” switch is in IGNITION ON mode.
1 Tachometer
Displays the engine speed in revolutions per minute.
2 Speedometer
Displays the vehicle speed.
3 Engine coolant temperature gauge
Displays the engine coolant temperature.
4 Fuel gauge
Displays the quantity of fuel remaining in the tank.
5 Trip information display
6 Automatic transmission shift position indicator lights
7 Odometer/trip meter
Odometer
Displays the total distance the vehicle has been driven.
Trip meter
Displays the distance the vehicle has been driven since the
meter was last reset. Trip meters A and B can be used to
record and display different distances independently.
8 Odometer/trip meter switching and trip meter resetting button
Switches between odometer and trip meter displays. Pushing and holding
the button will reset the trip meter when the trip meter is being displayed.
Instrument panel light control
The brightness of the instrument panel lights can be adjusted. 1 Brighter 2 Darker When the headlight switch is turned on, the brightness will be reduced slightly unless the control dial is tu ...See also:
Radio operation and cellular phones
Under certain conditions, the cellular phone being on in
your vehicle can cause erratic or noisy performance from
your radio. This condition may be lessened or eliminated
by relocating the cellu ...
Heater operation
Heating:
This mode is used to direct heated air to the foot
outlets.
1. Push the air recirculation button
to the
OFF position. (The indicator light turns off.)
2. Turn the air flow control ...
Vehicle placard
The vehicle placard is affixed to the
driver’s side B-pillar.
Example:
The vehicle placard shows original
tire size, recommended cold tire
inflation pressure on each tire at
maximum lo ...