Volvo XC60: Function - Park assist - Comfort and driving pleasure - Volvo XC60 Owner's ManualVolvo XC60: Function

Park assist button
Park assist button

The system is activated automatically when the vehicle is started. The indicator light in the button in the center console illuminates when the system is on.

• The front park assist system is active from the time the engine is started until the vehicle exceeds a speed of approximately 10 mph (15 km/h). It is also active when the vehicle is backing up.

• Rear park assist is active when the engine is running and reverse gear has been selected.

Activating/deactivating

The system is activated automatically when the vehicle is started.

- Press the Park assist button on the center console to temporarily deactivate the system(s).

> The indicator light in the button will go out when the system has been deactivated.

Park assist will be automatically reactivated the next time the engine is started, or if the button is pressed (the indicator light in the button will illuminate).

NOTE
Park assist is disengaged automatically when the parking brake is applied.

    Introduction
    The park assist system is designed to assist you when driving into parking spaces, garages, etc. It utilizes ultrasound sensors in the front bumper and rear bumper(s) to measure the distance t ...

    Signals from the park assist system
    View in the display (warning for objects front left/right rear) ...

    See also:

    Bluetooth® version
    For information about the Bluetooth® version installed in the vehicle, go to Phone menu Phone settings Bluetooth software version in car. ...

    Other settings (type A, B and C audio)
    Each brief press of the “MENU” button changes the control modes in the following sequence. Type A audio: Type B audio: Type C audio: Choose the preferred settings for each mode b ...

    Deleting registered cell phone from the list
    1. Select the “PHONE SETUP” menu. 2. Select the “DELETE” menu. 3. Select a cell phone to be deleted by operating the “TUNE/TRACK/CH” dial or saying a voice tag. 4. Select the “CON ...